we monitor your air for you

`

alerts

ZiggyAir algorithms continuously monitors your air quality and classify the result as being good, moderate or poor. These alerts are then sent to your mobile devices, kiosks or display monitors.

humidity

Excessive dampness or moisture in buildings is responsible for a range of problems including mould, dust mites and bacteria; and exposure to damp environments is associated with respiratory problems including asthma attacks. Very low humidity is linked to the spread of viruses.

temperature

Optimum temperature levels in an office environment should be in the range 20C to 22C. Anything over can result in mental fatigue causing diminished reaction times and delayed information processing.

ventilation

Ensuring that the air in the building is continuously replaced with fresh clean air is crucial to diluting virus loads (including COVID19) in the air. Carbon Dioxide (CO2) concentration is a very accurate measurement of how much fresh air there is in a building.

gases

Gas pollution or Volatile Organic Compounds (VOC) as it is more commonly known are poisonous gaseous chemicals emitted from certain solids and liquids with common sources being paints and coatings, building materials, cleaning supplies, glue used in furniture manufacture as well as various office equipment.

dust

Fine dust pollution or Particulate Matter (PM) as it is more commonly referred to, is air-suspended mixture of both solid and liquid particles and is listed as ‘criteria pollutants’ by the World Health Organisation. These particles include dust, diesel exhaust, pollen and mould spores.

how does it work?

an instrument for professionals

1

Air travels into the ZiggyAir Monitoring device where built-in sensors evaluate its quality.

ziggytec indoor air quality monitor device
2

Built-in connectivity enables wirelessly sending data to the cloud.

3

We monitor your air and send you reports about your air quality. Data can be accessed online through the ZiggyPortal or ZiggyMobile, anytime, anywhere.

ZiggyAir monitors CO2 levels and indicates using a simple traffic light system whether or not a window needs to be opened to ventilate the area.

ziggytec IAQ app and web console show when your indoor air quality is good ziggytec IAQ app and web console show when your indoor air quality is moderate ziggytec IAQ app and web console show when your indoor air quality is poor
ziggytec IAQ monitor shows when your indoor air quality is good ziggytec IAQ monitor shows when your indoor air quality is moderate ziggytec IAQ monitor shows when your indoor air quality is poor

brochure

setup in 2 simple steps

easy as that

  • 1Mounting the Device

    Using screws or double-sided tape, attach ZiggyAir device 3-5 feet high in the "breathing zone". Each device has specific UID code.

    Powering the Device
  • 2Access your Data

    Get your weekly/monthly reports of your air quality or login on our ZiggyPortal and monitor your air. For any question contact us on info@ziggytec.com

    Access your Data
  • Wireless
  • 1 day installation
  • Easy Removable
  • Battery-Powered
  • 5 Years of battery life
  • Secure

tech specs

General

  • Dimensions
  • 86x86x26mm
  • Weight
  • 120g
  • Battery
  • 3xAA 3c6V
  • Battery lifetime
  • 5 years
  • Measurement interval:
  • Every 30 mins (configurable)

Communications

  • Low - Power WAN
  • Wreless telecommunication wide area network designed to allow long-range communications at a low bit rate
  • Radio frequencies
  • 862 to 928 MHz

CO2 Sensor

  • Effective Range : 0~5000 ppm
  • Sensor : GSS CozIR LP/Sensirion SHT30
  • Accuracy : ±4%
  • Measurement Principle : solid-state non-dispersive infrared (NDIR) absorption

PM1 / PM2.5 / PM10 Sensors

  • 0.3~1.0; 1.0~2.5; 2.5~10 μm
  • Effective Range : 0~1000 μg/m3
  • Resolution : 1 μg/m3
  • Accuracy : ±15%
  • Sensor : Sensirion SPS30
  • Measurement Principle : laser scattering

VOC Sensor

  • Effective Range : 0-60,000ppb
  • Accuracy : ±20 %
  • Measurement Principle : metal-oxide gas sensor
  • Sensor : Sensirion SGP30

Temperature Sensor

  • Range : -20 - 50°C
  • Resolution : 0.1 °C
  • Accuracy : ±0.2 °C

Humidity Sensor

  • Range : 0-95 %RH
  • Resolution : 0.1 %RH
  • Accuracy : ±2 %RH
  • Sensor : Sensirion SHTC3